Almost as soon as Cosmic Coterie officially decided to tackle Madoka Magica for our big build this year, Koholint and I started brainstorming Madoka. We split the labor so that Koho took the upper half of Madoka and I took the lower half. I’ve followed several Madoka cosplayers over the years, and I was absurdly excited about making that ridiculous donut skirt.
My first step in tackling my portion of Madoka was the petticoat. That giant donut skirt needed a support structure for the floof, so I turned to Jessie Pridemore‘s Madoka petticoat tutorial as a starting point. There are 10+ fabric layers total in the petticoat: 5 layers of chiffon circle skirts with serger-gathered satin ribbon ruffles, a layer of cotton crinoline, and 5 layers of gathered double-circle skirts made from tulle. There are also 120 yards of satin ribbon attached to the hem which also add to the overall fluffiness.
As Dani and I started leveling the hems, I realized I wasn’t getting the volume I wanted out of the petticoat, and I was worried the donut skirt would ultimately weigh the petticoat down. Koholint pointed me in the direction of some tutu research she’d done. Tutus layer shorter layers on top of longer layers to create a fuller silhouette, which was perfect for our needs. Plus, it was kind of a cool nod to the ballet inspiration behind Madoka!
Bulk at the waist was a major concern, especially since Dani has a fairly short torso and we needed the bodice to be snug, so I attached all the skirt layers to a short yoke with an elastic waistband (and some pink satin ribbon I had on hand just because).
The Donut Skirt
The donut skirt was way more of a challenge than I initially anticipated. I went back and forth on a couple of approaches, but ultimately wound up using The Dangerous Ladies guide to Madoka’s skirt as a starting point. I originally set out constructing it as a super long gathered rectangle on both the top and lining layers. I quickly realized this would create far too much bulk under the bodice. To counter this issue, I opted to just gather the fashion layer (underlined with tulle) and create a circle skirt lining. Both layers were attached via a waistband which went under the bodice. The gathered portions sat just beneath the bottom of the bodice. The skirt closes with a lapped zipper.
Figuring out an appropriate length for the fashion layer took some trial and error. Ultimately the fashion layer was about 3-4″ longer than the lining, which gave me room to stuff the skirt with extra tulle for that ridiculous puff.
The ruffles on the skirt are made from 5″ bias cut peachskin. Since the magical girls in Madoka Magica don’t really have a uniform design, we decided to make sure we all had peachskin ruffles with rolled hems in our accent colors to bring a little uniformity to the designs. Koholint took care of the rolled hems, and I gathered them on my serger. The ruffles are sandwiched between the lining and fashion layers.
The Top Skirt
The pink top skirt was mostly handled by Victoria Bane. I drafted out the pink skirt based on the circle skirt we used for the petticoat and lining of the donut skirt. We had to remove a petal to get it to lay right on the donut skirt, so in hindsight, I would have drafted it as a 3/4 circle skirt instead.
Vickie airbrushed the white gradient onto the petals using Creatix paint and sewed up the skirt (side note: I’m still dying over how smooth that gradient is. Vickie rocks). The gems were scrapbooking stickers we found at Jo-Ann’s and glued on.
Since the skirts are so ridiculously short, I made a quick set of bloomers using Colette’s free Madeline pattern. I kind of wish I’d added a higher waistband for these since they ride pretty low, but they do the job.
Dani’s stockings were generously donated by We Love Colors. To create the ruffles at the top of the stockings, I stitched some reject peachskin ruffles from Dani’s skirt onto elastic bands. We tried using 2″ ruffles for the skirt initially, but they were waaaaayyyy too short to show up properly. We added a little extra flair to the stocking ruffles by adding some leftover trim from Koholint’s fabric stash.
Despite the crazy amount of work that went into these skirts, I’m quite pleased with the final result. There are a few things that I’d go back and fix if I were doing it again (side eyes spots with uneven gathers), but the silhouette is pretty damn nice. On to the next build!
Photos by Ash Snap Em Photography
Who’s your favorite character from Madoka?